New 300W 915nm High Power Fiber Coupled Diode Laser in Hot Selling with Jenoptik Chips
the 9XX series 320W high-power output semiconductor laser module, which is based on multi-laser chip spot shaping and combining technology, provides exceptional power density for advanced applications.
At present, the module can provide output wavelength of 915nm and 976nm. The module has a 1064nm laser isolation mechanism, which is ideally suited for pumping applications such as industrial fiber lasers and fiber laser amplifier and direct diode material processing systems. It avoids damage to the laser module caused by the reverse transmitted light in the system and improves the safety and stability of the whole system.
Size Drawing:
Data Sheet:
| Optical | |
| Center Wavelength | 915nm/976nm |
| Wavelength Tolearance | 10nm |
| Output Power |
300W |
| Slope Efficiency | >13W/A |
| Fiber | |
| Fiber Bend Radius | >60mm |
| Fiber Core Diameter | 200um |
| Fiber Numerical Aperture | 0.22N.A. |
| Fiber Connector | Bare |
| Electrical | |
| Operating Current | 20A |
| Threshold Current | 1A |
| Operating Voltage | 31.5V |
| Thermal | |
| Operating Temp. (Non-Condensing) | 15~55℃ |
| Wave Temp. Coefficient | ～0.3nm/℃ |
Operating the product outside of its maximum ratings may cause device failure or a safety hazard. Power supplies used with the device must be employed such that the maximum peak optical power cannot be exceeded. A proper heatsink for the Device on thermal radiator is required, sufficient heat dissipation and thermal conductance to the heatsink must be ensured.
Pls kindly contact our sales team for more information:
Hot Tags: 300W 915nm High Power Fiber Coupled Diode Laser suppliers, manufacturers China, factory, wholesale, made in China