12Bars 1200W Diode Stack for Stellelaser
Features:
High reliability and stability
Small gap between laser bars
Hard solder assembly technology
Compact designs, easy to integrate
Other wavelength and output power are available
Advantages:
(1) Hard solder sintering process, which effectively prevents the problems that have occurred in indium
solders-creep, electromigration and thermal fatigue of indium solder, to improve its reliability, stability
and long lifetime.
(2) Optimizing the design of water channel and packaging structure, and adopt high-efficiency material
with high thermal conductivity, low expansion coefficient, high temperature resistance, corrosion
resistance and oxidantion resistance, effectively improve the heat dissipation capability of the laser,
ensure higher output power of the laser bar & stability & longer lifetime.
Data sheet
Item No: WC781VS1200
| Optical | |
| Center Wavelength | 755nm 808nm 1064nm |
| Wavelength Tolerance | ±10nm |
| Working Mode | QCW |
| Output Power Per Bar | 100W |
| Number of Bars | 12 |
| Fast Axis Divergence(FWHM) | 38Deg |
| Slow Axis Divergence(FWHM) | 12Deg |
| Pulse Width | ≤400ms |
| Duty Cycle | ≤40% |
| Electrical | |
| Operating Current | ~100A |
| Threshold Current | ~10A |
| Operating Voltage | ~18V |
| Conversion Efficiency | ~50% |
| Thermal | |
| Operating Temperature | 20~30℃ |
| Storage Temperature | 0-55℃ |
| Others | |
| Coolant | Distilled Water |
| Flow Rate/Bar | 4~6L/min |
| Max Inlet Pressure | 350~500kPa |
| Water Temperature(No Condensation) | 23~27℃ |
| Filtered Water Particles | <20μm |
Package Drawing
Hot Tags: 12bars 1200w diode stack for stellelaser suppliers, manufacturers China, factory, wholesale, made in China