Pumping 878.6nm 80W Laser Diode

878.6nm Wavelength-Stabilized

80W output power, high power is available on request

200μm fiber core diameter

0.22 N.A.

For Solid-state laser pumping

● Avoid eye exposure to direct or scattered radiation.
● ESD precautions must be taken.
● Please connect pins to wires by solder instead of using socket when operation current is higher than 6A.
● Soldering point should be close to the root of the pins. Soldering temperature should be lower than 260℃ and time shorter than 10 second.
● Use constant current power supply. Avoid surge current.
● Laser diode must be used according to the specifications.
● Laser diode must work with good cooling.
● Operation temperature is 20℃ 30℃.
● Storage: 20℃ +70℃ all pins short circuit.