Hangzhou Brandnew Technology Co., Ltd. is one of China's leading manufacturers and premier suppliers of advanced monocrom 808nm 1000w hair removal laser head. Operating a state-of-the-art factory, we specialize in the entire production spectrum—from high-performance chips, TO/F/C Mounts, COS, and MCC bars, to robust stacks and advanced fiber-coupled solutions.
Monocrom 808nm 1000W Hair Removal Laser Head
Features:
-
Long lifetime, due to the absence of the mechanical stress caused by the soldering process at high temperature and avoiding micro-channels for water-cooling.
-
High reliability in pulsed conditions, since the clamped bars do no suffer the same fatigue effect than the soldered ones due to the thermal cycle. More than 100.000.000 shots.
-
Small thermal resistances, owing to the reduction of the contact resistance between electrodes and laser bar. No micro channels are needed to reach low thermal resistances.
-
Large storage temperature interval tested from –40ºC to + 85ºC
application：
- Medical and
- Aesthetics
Specification
Item No.: WC808VS1000
Item Name: Monocrom 808nm 1000W Hair Removal Laser Head
| Optical | |
| Center Wavelength | 808nm |
| Working Mode | QCW |
| Output Power | 1000W |
| Number of Bar | 20 |
| Wavelength Tolerance | ±10nm |
| Spot | 10*12mm² |
| Electrical | |
| Operating Current Lop | ＜100A |
| Threshold Current Lth | 50A |
| Operating Voltage Vop | 40V |
| Thermal | |
| Test Temperture | -40℃-85℃ |
| Storage Temperature | 0-55℃ |
| Coolant |
Distilled Water |
| Flow Rate/bar | 4~6L/min |
| Max Inlet Pressure | 350~500kPa |
| Filtered Water Particles | <20um |
| Water Temperature(No Condensation) | 23~27℃ |
Drawing:
Monocrom 808nm 1000W Hair Removal Laser Head with cold sapphire tip, 10x12mm² spot on skin,the ultra-large spot combined with high energy density shortens the single treatment time by more than 30%, and significantly increases the average daily customer load. Suitable for the whole body (bikini line, back, limbs, etc.), especially good at quickly treating large areas of coarse, hard hair. 808nm clinically proven permanent hair removal results reduce the need for repeat treatments and increase client trust.
Specifications at 20ºC, in the beginning of lifetime.
1. Voltage from the power supply must be higher, as due to high current there will be a voltage drop in the cables.
2. Parameters can vary depending on the exact prism designed.
Hot Tags: monocrom 808nm 1000w hair removal laser head suppliers, manufacturers China, factory, wholesale, made in China