1 laser debonding technology
With the development of components toward miniaturization and ultra-thinness, traditional processing equipment and traditional processing technology are difficult to meet the high-precision processing requirements.
Ultraviolet laser debonding technology obtains a fixed-size laser spot through optical path shaping, and uses a galvanometer or a platform to scan the glass wafer surface. This makes the release layer material lose its stickiness, and finally realizes the separation of the device wafer and the glass wafer.
2 Laser slotting technology
When slicing semiconductor wafers with low-k materials on the surface, if a traditional knife-wheel cutting scheme is used, defects such as chipping, curling, and peeling in the low-k layer are easily generated; The laser processing solution can effectively avoid the above problems.
Through the self-developed optical path system, the light spot is shaped into a specific shape, focusing on the material surface to achieve a specific groove shape; and using the extremely high peak power of the ultra-fast laser, the material is directly converted from the solid state to the gaseous state, thereby greatly reducing the heat The impact zone is an advanced laser cold working process.
3 Laser Modified Cutting Technology
Laser modified cutting technology is suitable for silicon, silicon carbide, sapphire, glass, gallium arsenide and other materials. By focusing the laser beam inside the wafer substrate layer, scanning is performed to form an internal "modification layer" for cutting, and then the adjacent crystal grains are broken by a cleaver or a vacuum split.
The laser cutting width of the laser modification cutting is almost zero, which helps to reduce the width of the cutting track; the modification inside the material can suppress the generation of cutting debris and eliminates the need for a glue cleaning process. During the cutting process, DRA autofocus is used, and the focus is automatically adjusted in real time following the change in film thickness to ensure that the laser focusing and reforming layer depth of the reforming and cutting is consistent.
4 TGV technology
TGV technology is a process of making vertical signals from the inside of a sealed cavity by making vertical electrodes between chips and between wafers. The technology is widely used in the field of MEMS wafer-level vacuum packaging technology. It has unique advantages in airtightness, electrical characteristics, package compatibility and consistency, and reliability. It is an effective way to achieve miniaturization and high integration of MEMS devices.









