Diode Lasers Will Be Added To Industrial Applications.

Apr 08, 2018

Leave a message

Direct luminescent green diode lasers can be used to replace the red version, especially in line lasers and point lasers, such as distance measurement and leveling. The human eye is most sensitive to the green spectrum, so the green light is better than the red light at the same laser output and laser protection level. Because of this, green light can cover further distances.

Osram optoelectronic semiconductor is introduced with the standard TO56 package of direct luminous green laser diode. This new element will further expand the advantages of direct light-emitting green diodes, benefiting industrial applications. It is mainly used for line lasers, such as leveling, etc. In terms of size, the PLT5520 laser is compatible with today's commonly used red laser diodes. In addition, there are photodiodes in this package to monitor the laser output.

Compared with the infrared laser - based laser, the most important advantage of direct light green diode lasers is compact design, high reliability and stable thermal resistance. The working temperature range supported by the PLT5520 laser diode is -20 to +60 degrees Celsius, so it is also very suitable for outdoor use. The new laser has a wavelength of 510nm to 530nm, with a typical wavelength of 520nm. Osram introduced two different optical output versions of 50mW and 30mW.

Direct luminescent green diode lasers can replace the red version brilliantly, especially in the application of distance measurement and level measurement of line lasers and point lasers. The human eye is most sensitive to the green spectrum, so the green light is better than the red light at the same laser output and laser protection level. Because of this, green light can cover further distances.

In terms of eye safety, direct light-emitting diode lasers are also better. When using frequency doubling version, designers need to ensure that components can stand in the way of infrared emission, or design application must ensure that the human eye protection, won't be hurt by these invisible rays. But neither requirement exists for direct light-emitting diodes, which emit only green light.