The Structure Of Laser

May 14, 2018

Leave a message

1. Laser working medium


The generation of laser must choose suitable working medium, such as gas, liquid, solid or semiconductor. In this medium, the particle number inversion can be realized to create the necessary condition for obtaining laser. Obviously, the existence of metastable energy levels is very beneficial to the realization of particle inversion. The existing working medium is nearly 1000 kinds, and the laser wavelength can be generated from vacuum ultraviolet far infrared.


2. Ji Liyuan


In order to make the particle number inversion in the working medium, we must use a certain method to stimulate the atomic system and increase the number of particles at the upper level. In general, gas discharge can be used to use a kinetic energy electron to excite the medium atoms, called electrical excitation, and also can be used to irradiate the working medium, known as light excitation, and thermal excitation, chemical excitation and so on. All kinds of incentives are visualized as pumping or pumping. In order to get laser output continuously, we must constantly pump to maintain more particles at the upper level than the lower level.


3. Resonator


With proper working material and excitation source, the particle number inversion can be realized, but the stimulated emission intensity generated by this method is very weak and can not be applied practically. So people thought of amplifying with optical resonators. The so-called optical resonator is actually located at both ends of the laser, and two reflectivity mirrors are mounted on the face-to-face. A piece of almost total reflection, a piece of light is mostly reflected and transmitted a little, so that the laser can be emitted through this mirror. The light reflected back to the working medium continues to induce new stimulated emission and light is amplified. As a result, light oscillates back and forth in the resonator, causing a chain reaction. The avalanche is magnified, resulting in intense laser output from the part reflecting the mirror.