Why Laser Engraving Machines Can't Carve Metal?

Dec 19, 2018

Leave a message

With the rapid development of optoelectronic technology, the application of laser engraving technology is more and more extensive, and the accuracy requirements of customers for engraving precision are getting higher and higher. Everyone knows that the main factors affecting laser engraving machines include: engraving speed, laser power, engraving precision, and materials. Among them, the most important is the material. The most incomprehensible is that laser engraving machines can be applied to wood products, glass, stone, paper, leather, alumina and other products. Why laser engraving machines can't carve metal?


The first is dot matrix engraving, which is similar to high-definition dot matrix printing. We all know that the laser head is oscillating left and right, each time engraving a line consisting of a series of points, and then the laser head simultaneously moves up and down to engrave a number of lines, and finally constitutes a full-page image or text. The scanned graphics, text and vectorized graphics can all be carved using dot matrix.


Then there is the vector cut, which is different from dot matrix engraving. Vector cutting is performed on the outer contour of the graphic. We usually use this mode to cut through wood, acrylic, paper and other materials, as well as marking on a variety of materials.


Next is the engraving speed. Engraving speed refers to the speed at which the laser head moves, usually expressed in IPS (inches per second), which results in high productivity. Speed ??is also used to control the depth of the cut. For a particular laser intensity, the slower the speed, the greater the depth of the cut or engraving. You can adjust the speed with the engraver panel or with your computer's print driver. In the range of 1% to 100%, the adjustment range is 1%. The advanced motion control system of the Hummer makes you get super-fine engraving quality when you are carving at high speed.


Then there is the engraving strength. Engraving intensity refers to the intensity of the laser that strikes the surface of the material. For a particular engraving speed, the greater the intensity, the greater the depth of the cut or engraving. You can adjust the intensity with the engraving machine panel or with your computer's print driver. In the range of 1% to 100%, the adjustment range is 1%. The greater the intensity, the greater the speed. The depth of the cut is also deeper.


Finally, the spot size. The laser beam spot size can be adjusted using lenses of different focal lengths. Small spot lenses are used for high resolution engraving. Large spot lenses are used for lower resolution engraving, but for vector cutting, it is the best choice. The standard configuration for the new device is a 2.0 inch lens. Its spot size is in the middle and is suitable for all kinds of occasions.


Laser engraving machines generally use CO2 lasers, and the power of laser tubes currently used belongs to the medium and small power range. The maximum is 300W. Originally, the metal absorbs less of this medium wavelength laser. Therefore, laser engraving machines are generally not used to engrave metal.