Laser Processing

Sep 30, 2020

Leave a message

1. Laser drilling

Pulse laser can be used for perforation, the pulse width is 0.1~1 millisecond, especially suitable for perforating micro-holes and special-shaped holes, the aperture is about 0.005~1mm. Laser drilling has been widely used in the processing of jewel bearings, diamond drawing dies, chemical fiber spinnerets and other workpieces of watches and instruments.


2. Laser cutting, scribing and lettering

In shipbuilding, automobile manufacturing and other industries, continuous CO2 lasers ranging from one hundred watts to ten thousand watts are often used to cut large workpieces, which can ensure precise spatial curve shapes and high processing efficiency. For the cutting of small workpieces, medium and low-power solid-state lasers or CO2 lasers are commonly used. In microelectronics, lasers are often used to cut silicon wafers or slits, with high speed and small heat affected zone. The laser can be used to engrave or mark the workpiece on the assembly line, without affecting the speed of the assembly line, and the engraved characters can be permanently maintained.


3. Laser trimming

Using medium and low power lasers to remove part of the materials on electronic components to achieve the purpose of changing electrical parameters (such as resistance, capacitance, and resonance frequency, etc.). Laser fine-tuning has high precision and fast speed, which is suitable for mass production. Similar principles can be used to repair defective integrated circuit masks, repair integrated circuit memory to improve yield, and can also perform precise dynamic balance adjustment on the gyro.


4. Laser welding

Laser welding has high strength, small thermal deformation, and good sealing. It can weld materials with large disparity in size and properties, as well as high melting point (such as ceramic) and easily oxidized materials. The laser-welded cardiac pacemaker has good airtightness, long life and small size.


5. Laser heat treatment

Using the laser to irradiate the material, selecting the appropriate wavelength and controlling the irradiation time and power density, the surface of the material can be melted and recrystallized to achieve the purpose of quenching or annealing. The advantage of laser heat treatment is that the depth of heat treatment can be controlled, the heat treatment position can be selected and controlled, the deformation of the workpiece is small, the parts and components with complex shapes can be processed, and the inner walls of blind holes and deep holes can be processed. For example, the cylinder piston can prolong its life after laser heat treatment; laser heat treatment can restore the silicon material damaged by ion bombardment.


6. Strengthening treatment

The laser surface strengthening technology is based on the two processes of high energy density heating of the laser beam and rapid self-cooling of the workpiece. In the laser surface strengthening of metal materials, when the energy density of the laser beam is at the low end, it can be used to strengthen the surface of metal materials. When the beam energy density is at the high end, the light spot on the surface of the workpiece is equivalent to a moving gap, and a series of metallurgical processes can be completed, including surface remelting, surface recarburization, surface alloying and surface cladding. The material substitution technology triggered by these functions in practical applications will bring huge economic benefits to the manufacturing industry.