25W 1064nm Pug-and-Play Laser System are ready-to-use, ultra-low-maintenance laser systems that provide collimated CW output in the MIR. Each laser system consists of a single-spatial-mode quantum cascade laser head that is operated by a touchscreen current / temperature controller with a 5" LCD. Using the same automated test stations that qualify our packaged MIR laser chips, we measure the wavelength and L-I-V characteristics of each laser head at the factory, then store the test results on an EEPROM inside the laser head enclosure. This EEPROM allows the controller to automatically adjust itself for calibrated plug-and-play operation.
Touchscreen Controller
The controller enables local and remote control of the laser's optical output. A resistive touch screen allows for the screen to be operated when using gloves or other protective equipment. Screenshots of the interface are available in the Controller Interface tab. The back of the controller includes three SMA connectors: an external modulation input for sine, triangle, or square waves; an external tuning input for fine tuning DFB lasers to a spectral absorption line and locking the wavelength using error signal feedback; and a TTL synchronization output. A 2.5 mm mono jack is included for interlock connections, and a 4 mm banana jack is included for use with a ground pin. In addition, a USB 2.0 mini B connector allows remote operation using software written by the user in C, C++, C#, LabVIEW®, LabWindows™/CVI, or Visual Studio.
Feature
62.5um fiber core through 2m fiber length
0~25W output power, 1064nm ±5nm
QCW, Pulse or others can be customized
Machine size: 270X115X245mm
Internal control (touch screen);
External control (external control (power: external analog; switch light: TTL level)
Welcome contact us for more details:
Whatsapp/Skype/Wechat: 0086 181 5840 0345
Email: info@brandnew-china.com